How Much Does Appliance Repair Cost?

Find out the average cost for hiring professional appliance repair from Palmer Appliance Repair:

Your kitchen is filled with large electrical appliances. An electrical oven, dishwasher or refrigerator requires the right wires. In the event any electrical appliance is improperly installed, it will pose a legitimate chance of causing a fire. To guarantee your electrical kitchen appliances are up to snuff, it is important to hire a trained service for appliance repair.

DIY electrical service for appliances is not a good idea. There are a handful small repairs where ”do-it-yourself” can be a consideration. In those cases, be sure to use the proper tools and to turn off the power.

Fixing or installing larger kitchen appliances, however, is more intensive. You should not consider ”do-it-yourself” repair. Your stove, for example, might require either a 250- or 125-volt circuit depending on if it’s 100% electrical or gas-powered, and you will want no less than two 20-amp, 125-volt circuits to power smaller appliances. These types of circuits will be able to carry a couple of outlets, but do not overload them — which often will mean, a third outlet is recommended.

The risk of a short (which could cause serious injury or even death) during any bigger job usually is not worth it. Just call a professional in CITY, STATE.

You can search for appliance repair services in CITY on on social media. Find repairmen with several customer reviews. Or ask for a recommendation from a coworker if you’re running into issues with a stove, dishwasher or refrigerator.

Hiring professional appliance repair services begins with contacting a repairman in CITY that has experience in service of kitchen appliances. Some repairmen are appliance-specific, and do not provide repair for all household appliances.

The primary reason some local appliance repair services are not a good choice to fix a kitchen appliance is due to all of the electrical appliances that use water to run. Refrigerators require water to make ice and , of course, dishwashers always use water to wash dishes. Water is extremely dangerous when it comes to electrical repairs.

If electrical work is not completed the right way and a waterline ruptures, for example, there’s a very real chance of electrocution. Electricity and water do not go together.

Which is why you want a CITY appliance repair company who knows how to handle both elements.

Certified appliance repairmen often charge around $45 to $65 per hour for their work, and independent contractors may charge somewhere around $80 and $110 per hour. This could seem like too much, that is because it is preferable to pay a higher price for top-notch work. If a repair company charges cheaper than $30 per hour, you should be suspicious.

You should be sure the appliance repairman is in possession of a permit from CITY for any kind of electrical work. Some low-quality technicians will say they do not require a permit, but never trust them. Always check with CITY officials.

Most local repairmen in CITY can charge a standard amount for their trip, from $50 to $65. You will pay the full price regardless of if the repair is completed, so have a small list on-hand of appliances for the company to inspect.

The national average is $159 for oven repairs – companies in CITY will typically charge $65 to $125 per hour. Expect a $50 to $85 trip charge too for the technician to drive and troubleshoot the issue.

The average prices for brand new appliances can range around $325 and $8,000. The wide range is dependent on the type of appliance, such as a high-price refrigerator to a low-cost dishwasher.

Fixing or replacing an electrical appliance is one of the most complex repair jobs one can complete in a home.

A possible way to limit these kinds of electrical issues is to listen very closely to a appliance repairman when he completes an estimate for repair. Specific types of wire need to be used depending on the type of kitchen appliance, and the colors of wires (for ground or neutral) sometimes differ when local regulations or requirements are updated.

Also, a lot of jurisdictions require arc fault protection for kitchen circuits plus ground fault circuit interruption (GFCI) protection. If the repairman doesn’t mention this, or suggests you do not really “need” them, it’s time to call a different repairman.

In addition, to follow a technician attentively when he performs the inspection of the range. If it’s a new kitchen appliance he or she is installing, ask if it can use the same circuit or might need an enhancement because there are obvious size and electrical power use differences in the newest models. The same applies to dishwashers and ovens.

professionals must be willing to describe what they are going to do, why it’s needed and explain each piece of the price, which likely includes appliance parts, labor and miscellaneous. Some appliance repair services willing to wave the travel fee if repair is completed.

OTHER RESOURCES:

Appliance Repair Tips
Appliance Safety
Repair or Replace Appliances
Refrigerator Parts